A gypsum fibre panel 18mm – 20mm Overlay panel for Underfloor heating systems.
It has a tongue and groove on all four sides, and comes in 1200 x 600 x 18mm also 20mm thickness.

Pre formed gypsum Fibre panels with castellation's for 12mm UFH pipe they are manufactured with four pipe lines 1000mm x 600mm x 20mm 150mm centres, with 900mm x 600mm circle-end returns.

Pre formed gypsum Fibre panels with castellation's for 12mm UFH pipe they are manufactured with six pipe lines perfect for low temperature heating using air/ ground source heat pumps.

Fibcem® Structural panels for Timber or metal joists, or as a heavy duty overlay for Under Floor Heating systems, such as our Tribeca cradle and batten or Tribeca floor system.

Fibcem® 6mm fibre cement board is a multi-purpose board that is ideal for providing a thin, thermally conductive floor layer over underfloor heating systems including our ULTRAPRO® extruded polystyrene
(XPS) systems.

An award winning Panel with very high thermal mass utilising Phase Change Materials (PCMs).

The MELROSE® floor system consists of a dry gypsum fibre routed for 12mm pipe at 150mm centres or 100mm for air source heat pumps using low temperature flow rates

FLOORJET® Acoustic underlay is a fully sealed system designed for reducing the impact noise transfer between separating concrete floors. Unrivalled in performance achieving a 23dB sound reduction.

The TRIBECA® floor system consists of a routed XPS/EPS aluminium foil for 12mm and 16mm pipe.

The ULTRA PRO® CRADLE and batten system has been designed for new build and refurbishment projects where uneven sub-floors need an S1 or S2 finish.